After showing the simplicity of the root procedure on some devices, like the Samsung Galaxy S5, which have even intelligent application that can perform almost all the operations, minimizing the risk of soft-brick, in this guide will we follow step by step way to root HTC One M8.
We start from a premise: the HTC M8, there is a procedure similar to that seen for the Galaxy S5, in fact, the procedure will be much longer and more complex, and will require high technical skills in the field.
Note: We strongly recommend that you do not perform this procedure if you do not know exactly what you do, because, given the delicate operations that we’re going to run, the risk of soft-brick are much higher, and could cause the worst damage if anything will be done in the wrong way.
Also note that given the radical nature of the changes that are going to make in this procedure, you will not be able to easily return back, so to avoid any doubt, start from the assumption that what we are going to do will void the warranty of your device and format the of device memory.
So you do the appropriate backup before you start! Moreover, the procedure will work with all of HTC One M8 models, even those branded by international operators, except those of Verizon, where the bootloader is locked in a different way from the others and where you cannot still act at the time.
This time it is absolutely essential to use a PC with the operations to be doing, in order as outlined below:
Unlock the Bootloader Unlocking and Root permission. If you are sure of what you want to do and you’ll take responsibility.
Make sure the battery is charged at most or at least on a percentage of about 80% or higher.
Repeat to make ALL of the case before starting backup.
Unlocking The Bootloader
When you’re really ready, open the Settings menu of your M8, open the Management tab Battery (Battery Manager) and select the Quick Start option (Fast Boot), setting it to OFF.
Are you looking for the easiest way to unlocking the endless possibilities on your phone? If you are then you are at the right place. All you need to do is simply follow this tutorial and then you get a concept of what all rooting is all about.
What is Rooting?
The term rooting been very familiar among Android costumers. Rooting basically entails you getting superuser access on your device. It results to the android gadget performance exceeding the limits of the power of the manufacturer
With simple way, a Note 4 root means that are given full access to the superuser for experimenting with, messing tweaking or modifying it. Similar with the term you get the admin commonplace in the Windows OS file connected system. For tips about rooting working together like that, along with their root access, you are able to change and have control on total system Android.
Astral also carry out root Android is not necessarily going to raise its performance or ability of Android phones. Rooting Android like “open the door” in order to develop this operating system. So, why Android gadget vendor unlock root from the beginning? There is a certain argument.
Due to this issue aims to protect the Android operating system with a total way. If the root access has been granted since the beginning and costumer accidentally change or eliminate one or many files that vital system, which will cause the performance of Android gadgets become unstable and may cause your device to get bricked.
Personally, I rooted because it means I could change, delete, add, and even undermine the entire existing mobile phone system.
Usefulness android root against, among others, of unrestricted access to the system, the installation files on the memory card, uninstall default, backup system, custom installation Rom, add RAM and many other things.
Do you want to get root access on your Samsung Galaxy S3 and thus permits access Super user? Today I bring you a tutorial where I teach you to root Galaxy S3 in a couple of clicks.
Despite being launched in 2012 and already have its successor, the Samsung Galaxy S3 is still the best selling smartphone in history. As time passes, smartphones reach more and more people and many are gaining more experience and are becoming sophisticated users who want access to more options and make the most of their devices.
Therefore, today I bring a simple tutorial in which I show you how to get root access on the Galaxy S3 sch-s968c.
What Does root access Entail?
Before starting we should clarify this. Being root means access to the root of the device, ie get maximum privileges on your phone. By having full control of your smartphone, you can access and modify certain things that previously could not be accessed, like using some unique applications, change the CPU frequency, perform backups, tethering and install cooked ROMs.
Now, if this comes packaged with so many benefits, then why isn’t every Android user a root user? There is enough fear around this (often unjustified) although admittedly be root has some consequences.
Consequences Of root access
As root, you can access the root of the team, ie some central archives. If we touch something that is not there, we can completely ruin the device(thus usually if you do not know what you do, donot even try!).
This means that the risk is not being root itself, misuse of what we do with the possibilities offered, but if you are careful and do not touch what is not, then you should not have any problems at all.
Two main losses:
With the Galaxy S3 root, one can lose the ability to receive automatic updates but here it should make a clarification. If you have rooted the device but NOT modified the Recovery, updates should keep coming. Otherwise you must upgrade manually.
The smartphone warranty: while in Europe there is a law that says rooting or flashing the phone does not lose the guarantee, the truth is that in most cases, companies are not liable for damages we cause the device and therefore the rooted mobile lose the guarantee (although also usually can reverse the root process).
I used the program Xprivacy Installer, which led me “by the hand” step by step so that I could succeed in rooting LG G2 lollipop 5.0.1.
I removed some Google applications – including Market, Games, Music, Chrome, Books, Movies
I removed several applications LG, including redundant motifs like.
Limited access to certain applications
I turned Greenify
I installed the keyboard from LG G3 – it is brilliant
I did not notice any problems during the LG G2 root, hitting KnockON properly, the new keyboard also (remember to make backups of the old just in case). The phone works just as well as before, and maybe better, as does its Greenify. No problems with coverage, WiFi, etc. Everything works as it should.
I Personally Installed This Set:
Titanium Backup – used to uninstall the application (eg. Those from the manufacturer or Google), freezing applications (only available in the PRO version), make backup copies of the application (a full copy along with the data)
Xposed Installer – necessary to install Xprivacy – something that is probably equivalent to Cydia on iOS (I installed it when passing the next steps in Xprivacy Installer – below is the link)
Xprivacy – brilliant program that allows to control the powers of individual applications (way to install is below)
DiskDigger – a program that allows to recover deleted data (in the free version only photos)
Make sure that you have downloaded or installed the below before proceeding with the rest of the tutorial.
Download the SkyHigh TW custom Note 5 root package file for T-Mobile Galaxy Note 5 from here.
Also, download the Odin3 v3.09 for installation from here.
Install Synapse app on your Note 5 from Google Play Store.
Here Are The Steps To Root Note 5 On Android 5.1.1 Lollipop:
Unzip Odin on your computer and install it.
Unzip firmware zip file in the same folder as Odin.
Switch your T-Mobile Samsung Galaxy Note 5 off and boot it in Download mode: press and hold Volume Down, Power and Home buttons together.
Open Odin and connect your phablet with computer. When connected successfully, you will get a message in Odin saying Added!! (In case you don’t get it, try another USB port. If that doesn’t help either, then re-install USB drivers).
On your Odin, click on PDA and select the Android 5.1.1 root package zip file for Galaxy Note 5.
Click on Start to initiate the update process.
When Android 5.1.1 update installation is successfully completed, your Note 5 will reboot.
After your device has rebooted and is back up again, open the Synapse app on your phone.
Open the app again: go to File System > Wipe Cache & Dalvik Cache.
Reboot your Note 5.
Ta da! Your T-Mobile Galaxy Note 5 has now been rooted on Android 5.1.1 Lollipop.
In recent weeks the known Chainfire developer has had to work overtime to keep up with the many new products introduced on the market, from the first developer preview of Android N to the many new smartphones presented at MWC 2016 in Barcelona.
After updating SuperSU, the package that allows you to gain root permissions, making it compatible with Android N, the developer has also upgraded CF-Auto-Root, a method which allows you to obtain root permissions on most Samsung devices.
This will not serve long and complicated procedures to obtain permits root on the new Samsung Galaxy S7 and S7 Galaxy Edge, although Chainfire recalls that its method requires an unlocked bootloader, since the procedure is running on a device with bootloader locked may lead to a complete brick.
The instructions to root Samsung Galaxy S7 or S7 Edge are available on our forum by using the links at end of article. As always remember that these are operations that go to void your warranty and may damage your smartphone.
Perform a preventive backup of the data and proceed with the operation only if you believe you are able to complete them properly, in order not to end up with an expensive paperweight. You can find the instructions and also resources on our forum, using the guide linked below.
As we said before, most rooting software will also download SuperUser on your phone, so there will be no need for you to do it on your own. In case it didn´t happen, or you want to install a newer version, you can do it. The easiest way is to go to the Google Play Store and download it. There are two versions available to you. First is the basic version that secures your phone from malicious and unauthorized access to the important parts of your phone. This version is free, but you may also get SuperUser Elite for a price of about 3 USD.
Beside features from the basic app, SuperUser Elite has several upgraded features, such as NFC support, apps settings backup and restore, PIN protection of the app, advance log management, notification settings for different apps and ghost mode.
How to use SuperUser
Before you continue, make sure that you root G3, as this is extremely important!
Once you enter SuperUser, you may first check “Info” section. There you may see do you have basic or Elite SuperUser and what versions of SuperUser and su binary you have, and you may update them. In “apps” section you will see a list of working apps that have permission to access su binary. In “log” section is the list of apps that asked that permission and their status. If you want to change your PIN, change the way SuperUser handles new request, go to ghost mode, show status icon or log data and many other activities; you can do that in “preferences”.
As you can see, using SuperUser is easy and simple. If you want to learn more about it and if you want to use all the features it offers, the best way is to take some time and explore it a little bit. For many reasons, this is an app you simply must have on your LG G3 after rooting, and if your rooting software did not install it automatically, make sure that installing SuperUser on your rooted LG G3 be the very first thing you will do once you rooted it.
So, you did it. Someone told you rooting is a great thing, you checked it and realized it could be useful. After gathering all information, you decided to go for it and you successfully rooted your Samsung Galaxy S6. It makes you satisfied, but that satisfaction fades away when you ask yourself: „ What now? “
Really, what now? This question is something many people face after they completed rooting Samsung Galaxy s6. If you heard someone compares it with jailbreaking, it can only confuse you more, since the two procedures have fundamentally different reasons and results. Jailbreaking is mostly performed to allow owners to use unauthorized apps. On the other hand, rooting gives owners an opportunity to take complete control over its Samsung Galaxy S6. And once you have complete control, the question is what to do with it.
Experienced users and technology geeks will have no problems with that, but an average user has just the basic knowledge, and the fact is that once you rooted your Samsung Galaxy S6, you have limitless access to everything, and it may be a double edged sword. You may do great things with your phone now, but you may also do a huge amount of damage to it because of your lack of knowledge; and like most users you want to use better and improved Samsung Galaxy S6, and you don´t want to brick it.
What is SuperUser?
In some cases, rooting software will automatically install SuperUser to your phone. If that is not the case, installing it should be the very first thing you will do after rooting. Why is SuperUser so important? Once you have rooted your phone, you are in charge of everything that happens. There are no limits to the apps you may download, or procedures you perform.
When you download some apps, they may request access to su. The su is a short for superuser binary, and it is actually a program that converts system files into executive files. Those apps that are granted the permission to access su can modify, erase, update, or do whatever they want to with any part of the system.
To avoid that, you need SuperUser. That is an app that decides what apps in your rooted Samsung Galaxy S6 may have access to su. Basically, every app that downloads to your phone must go through SuperUser, which will then ask you for a permission to install it. It can also memorize your decisions and act according to them in the future.
Please provide your root access by installing certain software / flash on your phone. This software is for each device / model differently, so each device / model should be flashed another piece of software.
Root says it all, root access gives access to the deeper layers of your software. In these layers you join the pieces of software that your phone keep running. Here you can make various adjustments. Adjustments may vary from thematic changes to additional options, full backups of your applications. The possibilities are almost endless. If you are in your root folder rumbling you can so you throw a lot upside software!
The S5 was this action (the rooting,) always recover so that the manufacturer would not notice. In S5 Is this unfortunately is not the case. At least … there seems to be a method for the S5. This is Towelroot, but I little even know because my phone is already rooted in accordance with the following manner and thus has the status KNOX 0x1 I will not go into here. This is something for another Topic. I also often see the xda developers forum tracks passing by suggesting that your security The security example remains unchanged hot KNOX. When your other “illegal” software flashed this protection will be put into operation. It is probably broken a physical fuse device. This is to see if your device in download mode startup (KNOX 0x1). To this, the manufacturers can see that you have something flashed. This is to my knowledge not recover by Samsung, unless they need to carry out extensive repairs very well replace some parts. If you’re following the path that there is virtually no way back to the new device to get your 100%! But … this science like us not to do so by rooting it: p
What this does to your guarantee is a gray area. Officially it is said that the user harm themselves pay the costs must. However, there will be many messages around that the manufacturer still repairing the unit free of charge provided that it can be shown that the damage is not attributable to the flash.
But again; This is a gray area.
So far I me there never attracted anything and have always provided my gears root access.
This How-To is of course at your own risk! I’m responsible for anything! This How-To is only for Samsung Galaxy S5 SM-G900F! But problems should I (if I can and / or have sense) and I think other people are doing their best to help you. Read everything to the letter and also follow all the steps. Go yourself muddling. If in doubt ask your question here! If anything goes wrong make sure good at what you did and what notifications you get the message board of Odin. This can record your by going to the white square with your mouse, hold the left mouse button and then select all the text / blue make, then printing blue with your right mouse button and then copy that copy to a Notepad file and then again saving somewhere you can find it again. Also important: as you know you will lose this most likely guarantee you as a Provider / Samsung Service Point sees this on your phone when you bring your device for repair!
Okay, here we go!
Step 1: Files win.
Here we will first need to download some files. These files we need to provide your phone with root access. You do not need much, just two things. The first is the file that allows you to root Samsung Galaxy S5, thus giving you root access. This made Chain Fire For more information you can click on this link and this link. We now use CF-Auto-Root-klte-kltexx-smg900f.tar. As you’ve probably seen a tar file. Your computer will recognize it as a .zip file, but this is nothing out! To download you must click on this link to the file. This file must save somewhere where you can easily find it again, I recommend you desktop. This downloaded file you do nothing! So do not unpack or anything. Download, store and nothing else. The second thing we need is the program to Flashing / installing this file. This program is called Odin3. To download you can click on this link Odin. The file you download is now a .zip file and called Odin3-v3.07. You save it in a place where you can find it. I recommend your desktop. This suit your example with WinRAR (which you can download here FileHippo.com) then you click on the downloaded file so: Odin3-v3.07, with your right mouse button, you get a menu, then choose: to extract Odin3- v3.07 \.
Now you will see a folder containing several files. Change or move any of these files and leave it!
So now you have all the files.
Now we set up everything
Step 2: All set ready.
We are going to prepare everything. Make sure your phone is charged to at least 75%, preferably completely full .You start Odin3 now on, this is done by clicking with your right mouse button on the file Odin3 v3.07.exe, and then selecting “as administrator run “, if you can not choose, choose to open. You will now get to see a menu that looks like this:
Now click the box PDA. This allows you to search among your files. You will navigate to where you saved the file CF-Auto-Root-klte-kltexx-smg900f.tar. In our example, so your desktop. Here you can double-click. Then your screen looks like this:
Now Put your S5 in download mode. You do this by turning off your S5 and then to keep the volume down button, the Home button and the Power button simultaneously pressed. Then you will see a warning menu and then select Continuous, so you must press your Volume Up button. You now see an Android man with a load of text in the upper right.
You close your S5 with your USB cable to your PC. Odin will now display in the Message Board Added. Repartition should NOT be ticked!
Now press start and Odin do its thing. It is now very important that the connection between S5 and the computer do not get lost! Otherwise serious damage can administer to your device!
In the message board you will now always see text appear. This text shows what Odin3 now installing.
When Odin3 finishes Flashing the box will be at the top in green and it will stand Pass. In the Message Board will be completed to assist you and S5 will now reboot. Let your S5 just doing his thing. You S5 will now started up again and voila you’re rooted!
The above tar file was originally created for Android version 4.4.4, but also with me on Android 5.0 done its job. Odin sometimes want a little crazy and will not be correct installation and indicate a fail. Possible solutions are: Redo the procedure, the file download again, Odin download again, another USB port. These are often the solutions when the installation does not go well.
This root is, as I said, with 1 app Superuser. Superuser displays apps that require root permission / access. So if you have installed the root, and you then install an app that requires root eg. Root Explorer and / or Titanium Backup, etc., and you start to emerge this app for the first time comes Superuser app and you’ll have to click Allow other works this app does not!
If your device provides root access you will not automatically receive your software update and you yourself have to flash the new software. Then you will tip your root access lost again and you will have to re-root.
For the above procedure: make before you flash anything of software always as many backups of your important data. It might just go wrong and if you then your device completely new software should provide you often all the important things like photos posts so lost!
I have explained this very extensive and it all seems quite a bit, for the seasoned flashers this is a breeze and money in general, if you do take longer than 30 seconds above procedure you just slow progress.
Franco.Kernel is known for its excellent speed performance and long battery life. The kernel is actually the phone powerhouse and controls the connection between the hardware and the operating system. So Franco.Kernel ensures, among other things, that the number of processors and the clock rate not screwed up quickly, but the kernel can also affect the sound, the vibration motor, disk and screen. Think of a kernel to the frequent updating drivers usually always bring improvements. The Franco.Kernel updater you can adjust all the settings of the kernel to buy and flashing new kernels.
Flashify is the all-rounder for the root user and those who are “flashing” their smartphone or tablet, or other software kernels and install it. With Flashify you can easily alternate recoveries, kernels and boot images flashing, directly from Android. When the flash is complete, the device will reboot after the changes were made. The flashing new software is supported.
But the app even more. Thus Flashify able to be backup hereinafter stored on Dropbox from your current recovery or kernel. In addition, users have the ability to share via the built-in sharing feature of Android the backup file using other apps. The free version is limited to three flashes per day.
Titanium Backup is the best backup app for Android. The app is frequently updated, has many different options and is extremely stable. To use Titanium Backup, you do need root privileges. If you often change ROM and need to recover a lot of apps, the paid version of Titanium Backup is also a good option. With the paid version you can at once restore all your saved settings and apps. Even savegames and settings for your Twitter notifications, for example.
Greenify lets your Android device run faster and more energy efficient dormant apps when they are not needed. Greenify that has to be provided with root privileges, carefully keeps all your running apps in the eye and know exactly when an app is no longer needed or can run quietly in the background. Note: Greenify is not a task killer, but a full-fledged app that very cleverly put all your unnecessary apps in hibernation. The user Greenify also get a useful insight to what some slowing smartphone or tablet and where some extra energy can be saved.
Solid Explorer just like the good old Windows Commander two screens where you can work simultaneously and drag files to other folders. From the app you can directly upload files to Dropbox and you’ll be able to add your favorite places on your memory card. An excellent file browser that can come through root privileges in the deepest directories of Android. Think of the important system- or data directory, where you can adjust key app or system files. The trial version is free to download the paid version must be purchased after 14 days.